27 things to check before you make the offer.

Every check that changes what a house is worth to you, in the order you walk it, with what to look for, what each one costs to fix, and whether it should change your offer or kill the deal.

By Jerryll NoordenNovember 20, 202624 min read
Out loud, about 12 minutes. Ask him anything.

The short version

  • Walk the same order every time: outside, structure, systems, inside, hazards, paperwork. Nothing gets skipped.
  • Four checks can kill a deal by themselves: serious foundation movement, knob-and-tube wiring, a failing septic field and major unpermitted work.
  • The sewer line is invisible on a walkthrough. A $125–$500 camera scope finds a five-figure problem.
  • Ages matter as much as damage. A working 14-year-old AC is still a replacement in your budget.
  • Write every finding as an item with a quantity, and price it at the finish level of your exit.

How to use this list.

Most bad offers aren’t bad math. They are a good formula fed a guessed repair number. The guess goes wrong in the same places on almost every house: the parts you can’t see from the living room, the systems that still work but are near the end, and the paperwork nobody checked.

This list is built to be walked. It follows the order you move through a property, so you never double back, and every check has the same four parts: what it is and why it matters, what to look for, what it costs to fix, and a verdict on what it should do to your offer.

123456789101112131415161718192021222324252627PermitsCodeFlood
Where each check lives. Walk it in order: outside, structure, systems, inside, hazards, then paperwork from your desk.

The verdicts are the point. Some findings only change your number. A few change whether there is a deal at all, and those are the ones to look for first.

Can kill the dealBig enough, or uncertain enough, to end the deal unless the price moves a lot. Get a specialist before you offer.
Check before you offerYou can’t know the cost from a walkthrough. Book the inspection, scope or search before you commit.
Price it inA known repair. Write it as an item and put the number in your budget.
Cheap or cosmeticSmall, predictable money. Include it so it never surprises you.

Each cost has a bar on the same scale, from $100 to $50,000, so you can see at a glance which findings are pocket change and which are the size of your profit.

Outside: start with the shell.

The outside tells you how water has been treated for the last twenty years, and water is behind most expensive repairs. Walk the full perimeter before you go in, and look up as much as you look ahead.

1
Outside

The roof: its age, and how many layers

The roof is the biggest single number most houses carry, and it is the easiest to price wrong because you look at it from the driveway. Ask the seller how old it is, then check for yourself: curled or cracked shingles, bald patches where the granules are gone, granules piling up in the gutters, and soft or wavy spots that suggest the decking under the shingles has rotted.

Count the layers at the edge. A second layer laid over the first is common; a third usually means everything comes off down to the boards, and the tear-off and disposal add real money to a replacement.

Look for
Curling, missing shingles, granules in the gutters, sagging, more than two layers at the edge, stains on the attic boards.
Cost to fix
Repairs $400–$2,000; a full asphalt replacement $8,000–$16,000, about $12,000 on average.$100$1k$10k$50k
Verdict
Price it in
Numbers: Fixr 2026 roof replacement guide.
2
Outside

Gutters and downspouts that dump water at the wall

Gutters are cheap. What they cause when they fail is not: a downspout that empties beside the foundation is the most common reason a basement gets wet. Walk the whole perimeter and follow every downspout to where the water lands.

Treat this as a clue as much as a cost. Peeling paint on the fascia, rot along the bottom of the siding, or a stained basement wall under one corner usually points straight up to a gutter that overflows.

Look for
Sagging runs, gaps at the seams, downspouts that end at the wall, rot on the fascia boards behind the gutter.
Cost to fix
New gutters on a typical house $1,200–$2,500, about $3–$29 a linear foot depending on material.$100$1k$10k$50k
Verdict
Cheap or cosmetic
Numbers: This Old House 2026; Resident 2026 cost guide.
3
Outside

Ground that slopes toward the house

The ground should fall away from the foundation: about six inches over the first ten feet. When it runs toward the house, every rain is pushed against the walls, and no amount of basement sealant keeps up for long.

Stand at the corners and look along the wall. Flower beds built up against the siding, patios that tilt inward and puddle lines on the concrete all tell you which way water goes. This is one of the cheapest fixes on the list for the damage it prevents.

Look for
Soil or mulch above the bottom of the siding, patios and walks tilting toward the house, puddle marks, erosion lines.
Cost to fix
Regrading around a foundation $1,000–$3,000; one side only, about $500–$1,000.$100$1k$10k$50k
Verdict
Price it in
Numbers: Angi and HomeAdvisor regrading costs; HomeGuide.
4
Outside

Rot in the siding and trim

Push a screwdriver gently into the bottom of the trim around doors and windows and into the lowest course of wood siding. Sound wood resists; rotten wood lets the tip sink in. Rot almost always starts where water sits: window sills, the bottom of door casings, corners behind gutters.

A few soft spots are a small job. Rot that runs behind the siding into the sheathing or framing is not, so look closely at any spot where the paint is bubbling or the board bulges.

Look for
Soft wood at sills, door casings and the lowest boards; bubbling paint; cracked or missing caulk; bulging boards.
Cost to fix
Typical siding repairs $350–$1,500; dry rot repair $500–$2,500; replacing all the siding $8,000–$30,000.$100$1k$10k$50k
Verdict
Cheap or cosmetic
Numbers: Inch Calculator 2026; HomeAdvisor wood siding; This Old House siding replacement.
5
Outside

Windows: fogged glass, rot and paint shut

Open a few windows in every room. Painted-shut sashes, broken balances that won’t hold the window up, and fogged double panes (the seal between the glass has failed) are all common. One bad window is a repair; a house full of single-pane originals is a line item that adds up fast.

In a flip, buyers notice windows. In a rental, they show up in the heating bill and in tenant calls. Count how many you would replace and price them as a number, not as “some windows”.

Look for
Fog or moisture between panes, rot on the sills, sashes that won’t open or stay up, cracked glass, drafts.
Cost to fix
About $517–$750 per window installed; a whole-house replacement often runs several thousand.$100$1k$10k$50k
Verdict
Price it in
Numbers: This Old House ($517 a window, $7,183 a project); Angi ($750 a window).
6
Outside

The chimney: crown, mortar and lean

Look up with your phone zoomed in. The concrete cap on top (the crown) cracks first, and once water gets into the masonry the freeze and thaw does the rest. Missing mortar between the bricks, white staining, and a chimney that leans away from the house are the signs to price.

A cracked crown is a small repair. A chimney that has to be taken down to the roofline and rebuilt is one of the bigger surprises on this list, so if anything looks wrong, put it in the scope as an allowance and get it checked.

Look for
Cracks in the crown, missing mortar, white staining, loose bricks, a gap between the chimney and the house, a lean.
Cost to fix
Crown repair $400–$2,200; partial rebuild $1,000–$3,000; full rebuild $3,100–$15,400.$100$1k$10k$50k
Verdict
Price it in
Numbers: Angi and HomeAdvisor chimney costs.

Structure: what holds it up.

This is where the deal-killers live. Most structural findings are minor, but the serious ones are expensive and hard to price from a walkthrough, so the goal here is to sort cosmetic cracks from movement and know when to bring in an engineer.

7
Structure

Foundation cracks: which ones matter

Nearly every concrete foundation has hairline cracks from shrinkage, and most of them are harmless. The ones that matter are wider than about a quarter inch, wider at one end than the other, stair-stepping through block, horizontal across a block wall, or showing one side pushed in or out past the other.

Look for the same problem from inside the house: doors that stick or swing open on their own, cracks running from the corners of door frames, floors that slope. A horizontal crack with a wall bowing inward is the classic deal-killer. If you see one, the next step is a structural engineer, before the offer.

Look for
Cracks wider than 1/4 inch, horizontal cracks in block, stair-step cracks, bowing walls, sticking doors, sloping floors.
Cost to fix
Crack injection $200–$1,000; typical repair $2,220–$8,112, about $5,165 on average; piers $1,000–$3,000 each; lifting a house $20,000–$23,000. An engineer’s inspection is about $300–$1,000.$100$1k$10k$50k
Verdict
Can kill the deal
Numbers: Angi 2026 foundation repair; Fixr; HomeAdvisor via HGTV for inspections.
8
Structure

Water in the basement

A dry basement on the day you visit proves nothing. Look for what water leaves behind: a white chalky line on the walls (efflorescence), rust at the bottom of the water heater and furnace, stained or swollen boxes, a tide line on the drywall, a dehumidifier that runs hard, and fresh paint on only the lower part of the walls.

Price it by cause. Gutters and grading (checks 2 and 3) solve many wet basements for a fraction of a waterproofing contract. When water comes up through the floor or the walls are saturated, you are into a perimeter drain and a sump pump.

Look for
White mineral lines, rust at the base of appliances, musty smell, new paint low on the walls, a sump pit, stained flooring.
Cost to fix
Sealing and a crack or two $500–$1,000; interior drain and sump about $3,000 on average, often $3,000–$10,000; exterior waterproofing about $7,000.$100$1k$10k$50k
Verdict
Price it in
Numbers: Angi basement waterproofing; Fixr 2026; This Old House 2026.
9
Structure

Termites and the damage they leave

The treatment is cheap. The damage is the number to worry about, because termites eat wood from the inside and leave a painted surface that looks fine. Look for pencil-wide mud tubes running up the foundation, wood that sounds hollow when tapped, small piles of wings near windows, and blistered paint on trim.

In many states the lender will want a termite inspection anyway. Get it before the offer on any house with wood close to the soil, and if there is activity, ask how far the damage goes into the sills and joists.

Look for
Mud tubes on the foundation, hollow-sounding wood, discarded wings, blistered paint, damaged sill plates in the basement or crawlspace.
Cost to fix
Treatment about $263–$1,032; damage repair $1,000–$10,000, about $3,000 on average, and higher when framing is involved.$100$1k$10k$50k
Verdict
Check before you offer
Numbers: HomeAdvisor termite treatment; Angi termite damage repair.

Systems: the parts that wear out.

Systems are where age is as important as damage. A furnace that runs perfectly today but is 22 years old is still a replacement you will pay for, either during your hold or in a buyer’s inspection request. Read every data plate and write the dates down.

How long the big systems usually last

Water heater (tank)
6–12 yrs
Central air
7–15 yrs
Heat pump
10–15 yrs
Asphalt roof
about 20 yrs
Furnace
15–25 yrs
Cast-iron drain pipe
50–60 yrs
0204060 years

Lifespans from InterNACHI’s estimated life expectancy chart; roof life varies with climate and ventilation. Anything already inside the last third of its range belongs in your budget as a replacement.

10
Systems

The electrical panel: brand and size

Open the panel door and read the label. Two brands deserve special attention: Federal Pacific (often labeled Stab-Lok) and Zinsco. Both have long histories of breakers that don’t trip when they should, and many insurers won’t write a policy until the panel is replaced, which can stall a closing.

Also check the size. A 60-amp service in a house you plan to fill with modern appliances and a heat pump is a coming upgrade. Double-tapped breakers, scorch marks and a panel that is warm to the touch all go in the scope.

Look for
Federal Pacific Stab-Lok or Zinsco labels, 60 or 100 amp service, scorch marks, double-tapped breakers, missing knockouts.
Cost to fix
Replacing a Federal Pacific or Zinsco panel about $2,000–$4,500, more when the service is upgraded at the same time.$100$1k$10k$50k
Verdict
Check before you offer
11
Systems

Old wiring: knob-and-tube and two-prong outlets

Knob-and-tube is the wiring of houses built before about the 1940s: single wires run on ceramic knobs through ceramic tubes. It has no ground, its insulation gets brittle with age, and it was never meant to be buried under attic insulation. Many insurers refuse it or require it removed.

You will spot it in an unfinished attic or basement, or guess it from two-prong outlets throughout. Replacing it means opening walls and ceilings, which is why it is one of the most expensive lines on this list. Price the whole house unless an electrician tells you otherwise.

Look for
Ceramic knobs and tubes in the attic or basement, cloth-covered wire, two-prong outlets in every room, ungrounded three-prong outlets.
Cost to fix
Replacing knob-and-tube about $12,000–$36,600, $24,300 on average, or roughly $10–$20 per square foot.$100$1k$10k$50k
Verdict
Can kill the deal
Numbers: Angi knob-and-tube replacement.
12
Systems

Supply pipes: grey plastic, lead or rusted steel

Look at the pipes coming off the water heater and under the sinks. Grey plastic stamped PB is polybutylene, installed in many homes from about 1978 to 1995; it is known for failing from the inside without warning. Dull grey pipe that scratches shiny is lead. Rusty threaded steel pipe means low pressure today and leaks tomorrow.

Turn on the tub and a sink together and flush a toilet. A big drop in pressure is a sign the old pipes are closing up inside. If the house needs a repipe, it is a full line item, not a contingency.

Look for
Grey PB plastic, lead or galvanized steel, green or white crust on fittings, low pressure with two fixtures running, brown water at first.
Cost to fix
A whole-house repipe about $1,500–$15,000, $7,500 on average; PEX in a mid-size house often $7,000–$16,000.$100$1k$10k$50k
Verdict
Check before you offer
Numbers: Angi 2026 repipe cost.
13
Systems

The sewer line out to the street

This is the check investors skip most and regret most. The pipe from the house to the street is buried, so nothing on the walkthrough shows it, and old clay or cast iron pipe fails from roots, breaks and sags. A camera inspection costs a few hundred dollars and shows the whole line on video.

Do it on any house over about 40 years old, any house with big trees in the front yard, and any house that has been empty for a while. A sewer replacement under a driveway or slab is a five-figure surprise that the camera finds in thirty minutes.

Look for
Slow drains on the lowest floor, gurgling toilets, a cleanout cap that has been opened often, large trees between the house and the street.
Cost to fix
A camera scope $125–$500; repair or replacement about $50–$250 a foot, more under a slab or driveway.$100$1k$10k$50k
Verdict
Check before you offer
Numbers: HomeGuide sewer scope; Angi and HomeAdvisor sewer line repair.
14
Systems

The water heater’s age

The age is printed on the label, often hidden in the serial number (the first letters or digits usually give the month and year). A standard tank water heater lasts about six to twelve years. If it is near the end, put a replacement in the budget; it is a small number you should never be surprised by.

While you are there, look for rust at the bottom, water in the pan, and a discharge pipe on the relief valve that runs down toward the floor. A missing pipe is a safety item an inspector will flag.

Look for
Manufacture date on the label, rust or water at the base, no discharge pipe on the relief valve, scorch marks on gas units.
Cost to fix
A new tank water heater about $900–$2,500; $1,300–$1,400 is a typical job.$100$1k$10k$50k
Verdict
Cheap or cosmetic
Numbers: HomeAdvisor ($1,327 average); Fixr ($1,400).
15
Systems

The furnace and air conditioner

Read the data plates for the age, then run both heat and cooling for a few minutes. Central air usually lasts about 7–15 years, a heat pump 10–15 and a furnace 15–25. An old unit that still works is not free: it is a replacement you will pay for during your hold or your tenant’s first summer.

Look for rust, a cracked heat exchanger warning on a service tag, and ductwork that is disconnected or uninsulated in the attic. If both pieces are old, price the pair, because most contractors will recommend replacing them together.

Look for
Manufacture dates on the units, rust, service stickers, short cycling, weak airflow at the far rooms, loose ducts in the attic.
Cost to fix
Furnace and AC together about $5,000–$12,500, around $7,500 on average; many quotes come in higher.$100$1k$10k$50k
Verdict
Price it in
Numbers: Angi; ConsumerAffairs ($8,000–$15,000).
16
Systems

The septic system, if there is one

If the house isn’t on city sewer, ask where the tank and drain field are and when it was last pumped. A septic inspection with the tank pumped is the only way to know its condition, and in some areas it is required before a sale anyway.

The tank is rarely the expensive part. The drain field is: when it fails, the ground over it gets soggy and smells, and replacing it can cost more than the rest of the rehab. Walk the field and look for wet spots and unusually green grass.

Look for
Soggy or extra-green ground over the drain field, sewage smell, slow drains through the whole house, no pumping records.
Cost to fix
Inspection $200–$900; a new drain field $5,000–$12,000; a full system $3,000–$20,000.$100$1k$10k$50k
Verdict
Can kill the deal
Numbers: Angi septic inspection and replacement costs.

Inside: where budgets drift.

The inside is what everyone looks at and where most investors already have instincts. The money leaks out in two places: decisions left for later, and damage hidden under finishes. Decide refresh or replace at the walkthrough, and press, lift and open things to see what is underneath.

17
Inside

The kitchen: what you keep and what you replace

Kitchens are where budgets drift, because “refresh” and “replace” are a few decisions apart. Open every cabinet: look under the sink for water damage and soft boxes, check that doors and drawers close, and see whether the counters are worth keeping. Painted cabinets, a new counter and new hardware is a different job from a new layout.

Decide at the walkthrough, write it as items, and price the finish level of your exit: rental-grade for a hold, what the neighborhood buyer expects for a flip. Most of the drift comes from deciding later.

Look for
Water damage under the sink, sagging shelves, delaminating doors, outdated counters, appliances that don’t work, a layout that fights the room.
Cost to fix
A minor kitchen remodel about $10,000–$20,000; a major one $20,000–$65,000; painting cabinets and new hardware far less.$100$1k$10k$50k
Verdict
Price it in
Numbers: Angi 2026 kitchen remodel costs.
18
Inside

Bathrooms: soft floors and hidden leaks

Stand next to the toilet and rock your weight. A floor that gives means water has been getting into the subfloor, often from a failing wax ring or a tub that leaks at the drain. Press on the tile around the tub; loose tiles and cracked grout let water behind the wall.

Look at the ceiling below each bathroom for stains. The cosmetic part of a bathroom is easy to price; the subfloor and the wall behind the tub are what turn a $6,000 bathroom into a $12,000 one.

Look for
A soft floor at the toilet or tub, loose tiles, failed caulk, stains on the ceiling below, a running toilet, a weak fan.
Cost to fix
A small bathroom remodel about $1,500–$15,000, $6,500 on average.$100$1k$10k$50k
Verdict
Price it in
Numbers: Angi and HomeAdvisor small bathroom remodel.
19
Inside

Floors: what is under the carpet

Lift a corner of the carpet in a closet. Hardwood under it can often be refinished for less than new flooring; stained or damaged subfloor needs replacing before anything goes down. Walk every room for soft spots, squeaks that move with you, and dips that suggest a joist problem.

Measure the square footage per room. Flooring is priced by the foot, so “new floors” is not a number until you know how many.

Look for
Hardwood under carpet, pet stains through to the subfloor, soft spots, dips, mismatched transitions between rooms.
Cost to fix
Luxury vinyl plank installed about $4–$16 a square foot; most projects $5–$12.$100$1k$10k$50k
Verdict
Cheap or cosmetic
Numbers: HomeGuide and Fixr LVP flooring costs.
20
Inside

Ceiling stains and what they point to

A stain is a message from somewhere above it. Under a bathroom, it points to the tub, toilet or shower valve. Under the roof, it points to flashing, a vent boot or the chimney. Fresh paint on one patch of ceiling is worth a question: something was covered.

Ask whether the source was fixed. A stain from a roof leak that was repaired years ago is cosmetic. A stain that is still damp, or growing, is a repair you haven’t found yet.

Look for
Brown rings, sagging drywall, fresh paint on one patch, damp spots, stains below bathrooms and around chimneys and vents.
Cost to fix
The cost is whatever caused it. Drywall and paint for the stain itself is small; find the source and price that.
Verdict
Check before you offer
21
Inside

Mold, and the moisture behind it

Mold needs water. A little on a bathroom ceiling is a ventilation problem; mold in a basement, attic or behind walls means a leak, a wet foundation or poor air movement, and removing the mold without fixing the water just lets it come back.

Use your nose as much as your eyes: a musty smell in a closed house is a clue. Price the cleanup and the cause together, and for anything more than a small area, get a remediation quote before you offer.

Look for
Musty smell, black or green spots on drywall, attic sheathing with dark staining, mold on stored items in the basement.
Cost to fix
Remediation about $1,223–$3,749, $2,364 on average; whole-house jobs $10,000–$30,000.$100$1k$10k$50k
Verdict
Check before you offer
Numbers: Angi mold remediation.

Hazards: the rules that come with old houses.

Hazards rarely kill a deal on their own, but they change how work must be done and who can do it. Know the build year before you walk, because most of these checks start with it.

22
Hazards

Radon in the lowest level

Radon is a radioactive gas from the soil that you can’t see or smell. The EPA recommends fixing a home at or above 4 picocuries per liter. In many areas a test is a routine part of buying, and a buyer’s inspector will run one on your flip anyway.

The fix is a fan and a pipe that pull air from under the slab and vent it above the roof. It is a predictable cost, so put it in the scope for houses in high-radon areas instead of finding out at resale.

Look for
Your area’s radon map, a past test result, an existing mitigation pipe and fan, a basement used as living space.
Cost to fix
Testing about $145–$714; mitigation about $786–$1,275, about $1,030 on average.$100$1k$10k$50k
Verdict
Cheap or cosmetic
Numbers: EPA action level; Angi and HomeAdvisor radon mitigation.
23
Hazards

Asbestos and vermiculite insulation

Older houses can hold asbestos in pipe wrap, old floor tiles, popcorn ceilings and siding. Left alone and intact it is usually managed; it becomes a cost the moment your rehab disturbs it. Loose, pebbly grey-brown insulation in the attic is often vermiculite, and much of it sold in the US came from a mine in Libby, Montana that was contaminated with asbestos.

If your scope tears out what might contain asbestos, test first. Abatement has to be done by licensed contractors, and it changes both the budget and the timeline.

Look for
White wrap on old pipes and ducts, 9-inch square floor tiles, popcorn ceilings, loose pebbly attic insulation, old cement siding.
Cost to fix
Abatement about $2,250 on average for typical jobs; removing vermiculite from an attic often $5,000–$15,000.$100$1k$10k$50k
Verdict
Check before you offer
Numbers: Angi asbestos removal; EPA on vermiculite.
24
Hazards

Lead paint in a house built before 1978

The EPA estimates that about three-quarters of US homes built before 1978 still contain some lead-based paint. That doesn’t stop the deal. It changes how the work is done: anyone paid to disturb painted surfaces in a pre-1978 home must be an EPA lead-safe certified firm, and the rule applies to house flippers too.

Price lead-safe work practices into the painting, window and trim lines of any older house, and make sure the contractors you hire are certified. Peeling paint on windows and porches is where it matters most.

Look for
A build year before 1978, peeling or chalking paint on windows, doors, porches and trim, original wood windows.
Cost to fix
Higher labor on painting, window and trim work in older homes; full abatement is a separate, larger job priced by a certified firm.
Verdict
Price it in
Numbers: EPA Renovation, Repair and Painting rule.

Paperwork: the checks you do from a desk.

These three take minutes online and can save you from the worst kind of surprise: a problem that isn’t a repair at all, but a closing that won’t close or a buyer who can’t get a loan.

25
Paperwork

Work done without a permit

Compare what you see with the public record. A finished basement, a third bedroom or an addition that isn’t on the tax card often means work done without a permit. That matters because a buyer’s appraiser may not count the space, and the city can require the work to be opened up, brought to code or removed.

Ask the seller directly, check the permit history with the building department, and price the worst case. Legalizing work after the fact means a permit fee plus whatever it takes to pass inspection today.

Look for
Rooms, baths or square footage missing from the tax record, amateur framing or wiring, a garage turned into living space, no permit history.
Cost to fix
A retroactive permit is often a few hundred dollars plus corrections; rebuilding an unpermitted room can run $21,927–$83,339.$100$1k$10k$50k
Verdict
Can kill the deal
Numbers: HomeLight on unpermitted additions; local building departments.
26
Paperwork

Open permits and code violations

An open permit is work that was started and never signed off. A code violation is a notice the city already sent. Both can follow the house to the next owner, and both can hold up a closing or a certificate of occupancy when you sell.

Search the address with the building and code enforcement departments before you offer, or ask your title company. A violation for tall grass is nothing; one for an unsafe structure is a scope and a deadline.

Look for
Open permits in the city portal, code enforcement notices, liens for city fines, boarded windows or posted notices.
Cost to fix
Closing an old permit can be a small inspection fee or a full repair; city fines and liens vary by city.
Verdict
Check before you offer
27
Paperwork

Flood zone and insurance

Look the address up on FEMA’s flood map before you offer. A house in a high-risk flood zone with a mortgage will usually need flood insurance, and that premium changes the numbers for a rental and the buyer pool for a flip.

Get an insurance quote early on any older house too. Items earlier on this list, such as a Federal Pacific panel, knob-and-tube wiring or an old roof, are exactly what insurers ask about, and a refused policy can stall a closing.

Look for
The address on FEMA’s flood map, a past flood claim, water lines on the basement walls, an insurer’s questions about panel, wiring and roof age.
Cost to fix
Not a repair. Get a quote before you offer and carry the premium in your holding costs or rental numbers.
Verdict
Check before you offer
Numbers: FEMA Flood Map Service Center.

The ones that can cost the whole profit.

Most of the 27 are a few hundred to a few thousand dollars. A handful can swallow the profit on a typical flip by themselves. These are the high ends of each range, and they are why the verdicts above say to get a specialist before you offer, not after.

The most each one can cost

Knob-and-tube wiring$36,600
Mold, whole house$30,000
Lifting a foundation$23,000
Septic system$20,000
Repipe$16,000
Asphalt roof$16,000
Chimney rebuild$15,400
Furnace and AC$15,000
A rule worth keeping: when one of these is uncertain, don’t average it. Carry the whole allowance in your offer, and lower it only when a specialist gives you a real number.

All 27 on one page.

Save this table for the walkthrough. Each line is the first cost to check; the full ranges and what to look for are above.

CheckCost to fixVerdict
1. The roof: its age, and how many layersRepairs $400–$2,000Price it in
2. Gutters and downspouts that dump water at the wallNew gutters on a typical house $1,200–$2,500, about $3–$29 a linear foot depending on material.Cheap or cosmetic
3. Ground that slopes toward the houseRegrading around a foundation $1,000–$3,000Price it in
4. Rot in the siding and trimTypical siding repairs $350–$1,500Cheap or cosmetic
5. Windows: fogged glass, rot and paint shutAbout $517–$750 per window installedPrice it in
6. The chimney: crown, mortar and leanCrown repair $400–$2,200Price it in
7. Foundation cracks: which ones matterCrack injection $200–$1,000Can kill the deal
8. Water in the basementSealing and a crack or two $500–$1,000Price it in
9. Termites and the damage they leaveTreatment about $263–$1,032Check before you offer
10. The electrical panel: brand and sizeReplacing a Federal Pacific or Zinsco panel about $2,000–$4,500, more when the service is upgraded at the same time.Check before you offer
11. Old wiring: knob-and-tube and two-prong outletsReplacing knob-and-tube about $12,000–$36,600, $24,300 on average, or roughly $10–$20 per square foot.Can kill the deal
12. Supply pipes: grey plastic, lead or rusted steelA whole-house repipe about $1,500–$15,000, $7,500 on averageCheck before you offer
13. The sewer line out to the streetA camera scope $125–$500Check before you offer
14. The water heater’s ageA new tank water heater about $900–$2,500Cheap or cosmetic
15. The furnace and air conditionerFurnace and AC together about $5,000–$12,500, around $7,500 on averagePrice it in
16. The septic system, if there is oneInspection $200–$900Can kill the deal
17. The kitchen: what you keep and what you replaceA minor kitchen remodel about $10,000–$20,000Price it in
18. Bathrooms: soft floors and hidden leaksA small bathroom remodel about $1,500–$15,000, $6,500 on average.Price it in
19. Floors: what is under the carpetLuxury vinyl plank installed about $4–$16 a square footCheap or cosmetic
20. Ceiling stains and what they point toThe cost is whatever caused it. Drywall and paint for the stain itself is smallCheck before you offer
21. Mold, and the moisture behind itRemediation about $1,223–$3,749, $2,364 on averageCheck before you offer
22. Radon in the lowest levelTesting about $145–$714Cheap or cosmetic
23. Asbestos and vermiculite insulationAbatement about $2,250 on average for typical jobsCheck before you offer
24. Lead paint in a house built before 1978Higher labor on painting, window and trim work in older homesPrice it in
25. Work done without a permitA retroactive permit is often a few hundred dollars plus correctionsCan kill the deal
26. Open permits and code violationsClosing an old permit can be a small inspection fee or a full repairCheck before you offer
27. Flood zone and insuranceNot a repair. Get a quote before you offer and carry the premium in your holding costs or rental numbers.Check before you offer

Doing it in one walkthrough.

EstiMate is built for this walk. Take photos room by room as you go through the list; it writes each finding as a scope line with a quantity, prices it at the finish level you choose, and adds the permits, dumpster and consumables that don’t belong to a room. The deal analysis then works back from the after repair value to your maximum offer, so you leave the house with a number you can defend, line by line.

Questions

What people ask first.

What should I look at first on a house walkthrough?

Start with the four checks that can end a deal: foundation movement, old knob-and-tube wiring, a failing septic field and major unpermitted work. If any of them is present, get a specialist before you price the rest.

Should I always get a sewer scope?

On any house over about 40 years old, with big trees between the house and the street, or that has sat empty, yes. The camera inspection costs $125–$500 and finds problems that cost thousands.

How do I tell how old a furnace, AC or water heater is?

Read the data plate on the unit. The manufacture date is printed there or encoded in the serial number, and most manufacturers publish how to read it.

Which foundation cracks are serious?

Cracks wider than about a quarter inch, horizontal cracks in block walls, stair-step cracks, walls bowing in, and cracks paired with sticking doors or sloping floors. Hairline shrinkage cracks are common and usually harmless.

Can I buy a house with unpermitted work?

Often, yes, but price the worst case. The city can require the work to be opened up, brought to code or removed, and an appraiser may not count the space.

How much contingency should I add after this checklist?

Ten percent is common on older houses. Use more when the roof, foundation, sewer or systems are uncertain, and carry full allowances for the deal-killers until a specialist prices them.

JN
Jerryll NoordenFounder of REILink. Former NASA robotic scientist, flipping houses since 2016. He built EstiMate because every repair number he was handed was a guess.

Walk it once. Know the number.

Every finding on this list becomes a priced line from your photos, and your maximum offer is waiting before you reach the car.

Free for a week. The week starts on your first property, not the day you sign up.