What should it cost? Know before you call.
Three quotes for the same repair can be hundreds or thousands of dollars apart, and most homeowners have no way to tell which one is fair. Here is what goes into a fair price, and how to know the number before anyone comes to the door.
The short version
- A fair price covers materials, labor, supplies and disposal, plus the contractor's overhead and a reasonable profit.
- Quotes differ mostly because contractors price different work, materials and assumptions, not because one is a crook.
- Remodelers average a net profit of about 6 percent, according to the NAHB. A good contractor isn't getting rich on your job.
- Knowing the fair range before you call lets you spot a quote that is too high, and one that is too low to be real.
- Some jobs are reasonable to do yourself; anything involving gas, structure or the electrical panel usually isn't.
Why quotes are so far apart.
When you ask three contractors to "fix up the bathroom", each one decides what that means. One replaces the vanity and toilet. One also replaces the floor and the fan. One assumes you want tile. Their prices are honest for three different jobs, and none of the quotes says so clearly.
The rest of the difference is the business behind the quote. A licensed, insured company with a warranty, a dispatcher and a truck full of parts costs more to run than one person with a van. Both can be the right choice; you just need to know which one you are paying for.
What goes into a fair price.
Here is the middle quote taken apart: replacing the vanity, the toilet, the floor and the exhaust fan in a small bathroom.
| Small bathroom update | Cost |
|---|---|
| Materials: vanity and top, toilet, flooring, fan | $1,255 |
| Labor: plumbing, flooring, electrical for the fan | $1,900 |
| Disposal and permit | $245 |
| Contractor overhead and profit | $850 |
| Fair price | $4,250 |
The overhead and profit line is the one homeowners resent most, and the one that keeps a contractor in business: insurance, the truck, the office, the warranty, and a modest profit. The National Association of Home Builders' latest study found remodelers kept an average net profit of 6.3 percent of revenue in 2024. A fair price lets a good contractor stay a good contractor.
Why you want a range, not a number.
A fair price is a range, because labor rates, material choices and access vary from house to house and town to town. Knowing the range before you call helps you two ways.
- 1
Spot the high quote
A price far above the range deserves a question: what is included that the others didn't include?
- 2
Spot the low quote
A price far below it usually leaves something out, and the missing piece comes back as an extra charge later.
- 3
Ask better questions
Is the permit included? Disposal? What happens if the subfloor is damaged? Every contractor should answer the same way.
Do it yourself, or hire it out?
| Job | Usually reasonable to DIY | Usually hire |
|---|---|---|
| Painting a room | Yes | — |
| Replacing a faucet or toilet | Often | If valves or the flange are corroded |
| Installing click-together flooring | Often | If the subfloor needs repair |
| Replacing a light fixture | If you know how to shut off power | New circuits or panel work |
| Water heater | — | Gas, venting and permits |
| Anything structural or roofing | — | Yes |
When you hire: a short checklist.
- 1
Same scope for everyone
Give every contractor the same written list of what you want done, so the quotes compare.
- 2
Written, itemized quotes
A price per item or per room, with what is included and what isn't.
- 3
License and insurance
Ask for both and check them. Your state or town usually has an online lookup.
- 4
A sensible deposit
Be wary of large up-front payments. Some states cap deposits for home improvement work; check yours.
- 5
Changes in writing
If the job changes, get the new price in writing before the work is done.
Know the number in minutes, for free.
EstiMate is free for homeowners. Take a few photos of what needs fixing and EstiMate tells you what the work involves and a fair price range for your area, item by item. Use it for a quick fix, to plan a bigger remodel at the finish level you want, to check the health of the whole house, or to see what repairs would add if you sell. When you are ready, send the same list to contractors so every quote prices the same job.
What people ask first.
How do I know if a contractor quote is fair?
Compare it with a fair range for the same scope in your area, and make sure it includes the same items as your other quotes: materials, labor, disposal, permits.
Why are contractor quotes so different?
Mostly because each contractor prices a slightly different job or finish level, and because their businesses have different costs.
How much profit does a contractor make?
NAHB found remodelers averaged a 6.3 percent net profit in 2024, after paying for overhead such as insurance, vehicles and staff.
Should I always pick the cheapest quote?
Only if it includes everything the others include. The cheapest quote often leaves things out that come back as extra charges.
Is EstiMate free for homeowners?
Yes. Homeowners can estimate repairs and plan projects for free.
Read next.
Why Contractor Bids Vary by 100% for the Same Job (and How to Compare Them)
Different scopes, different finish levels, missing line items and different business models. How to get bids you can actually compare, line by line.
7 min readThe Costs Your Estimate Forgets: Consumables, Dumpsters and Permits
Caulk, fasteners, blades, dump fees and permits can be 5 to 15 percent of a job. Here is where they hide and how to price them every time.
8 min readFrom Inspection Report to Repair Credit: A Step-by-Step Guide for Agents
Turn a 40-page inspection report into a repair credit both sides accept: sort what matters, price it, attach the photos, and negotiate with a scope instead of opinions.
7 min readA fair price, before you call anyone.
Photos in, a fair price range out, item by item, and the same list to send to every contractor.
Free for homeowners. No card, no trial, nothing to cancel.
Hi, I'm Humphrey.
I'll read this article to you, part by part. Stop me and ask anything along the way.
Can't hear me? Make sure your speakers are on